Plastic Concrete Form
![Plastic Concrete Form](https://yhplasticformwork.com/wp-content/uploads/2023/11/PP-hollow-construction-board.jpg)
Plastic Concrete Form
raw material: modified Polypropylene
Specification: 915mm*1830mm/1220mm*2440mm
Thickness: 12mm/15mm/18mm/20mm
Application: Column, slab, wall, beam, etc.
Features of Plastic Concrete Form :
1. Compared with traditional wooden/ steel formwork, plastic concrete form ( PP hollow construction board) can reduce the cost by 30% because of its features: high strength, good impact resistance, good abrasion resistance, ,reusable at least 50 times and high cost-effective price.
2. It is very suitable for seaside buildings, and water conservancy projects because of its advantages: good waterproof capacity and doesn’t deform, crack, and delaminate.
3. It is easy for workers to operate: can be drilled, nailed, sawed, cut, etc. So It is very flexible for workers to use and suitable for all buildings and engineering.
4. It can improve dismantling efficiency by 40% because it is convenient to remove. Only tapping, our plastic formwork drops down and there is no need to worry about the damage from dropping down. What’s more, shaped concrete structures reach the standard of fair-face and can be directly decorated with veneer, shortening the construction time by 30%.
5. It can be used for special curved surface concrete structures because of its good toughness. We can use a forklift to bend the formwork.
6. With lightweight because of low density and hollow structure in the middle, it is easy for workers to carry and operate and reduce the transportation cost.
7. We don’t need brushing oil to save cost and shorten construction time because of its flat and smooth surface and not sticking to the concrete.
Click here to see more test video about column formwork.
The following pictures are column formwork.
Shaped concrete by our plastic concrete form.
Some of the construction sites where use our plastic concrete form
Our honors
Construction Notes
The splicing of plastic templates should comply with the following regulations:
(1)The joint of the template should be tight and flat, without any misalignment;
A、Joint between two templates ≤ 1mm; B. The height difference between adjacent templates is ≤ 1mm; C.Template flatness ≤ 2mm; D. The deviation of template plane size is ± 3m
(2) The plane template joint should be on the wooden square, and the gap in other cases should be sealed with ( tape ). The construction party strictly enforces.
(3)The through-hole direction should be perpendicular to the horizontal plane, and the sealing measures should be taken to prevent the cement slurry from seeping into the hole from the splicing seam at the end of the plate; double-sided adhesive is recommended.
If you want to know more about column formwork,contact us directly for more information such as price, and delivery time. terms of payment.