Plastic Shuttering Sheets
Product | plastic shuttering sheets |
Type | Construction formwork Plastic |
Material | PP |
Size | 915*1830mm/1220*2440mm |
Thickness | 12mm/15mm/18mm/20mm |
The advantages of plastic shuttering sheets
1. Lightweight, high strength, good hardness, impact resistance, wear resistance。
2. Smooth and smooth surface; good pouring effect。
3 No moisture absorption, no deformation, no mildew; long-term immersion in water, no delamination, no foaming,stable sheet size, especially suitable for use in underground and humid environments.
4. Good toughness, can be used to make various irregular templates。
5. It is resistant to acid and alkali and corrosion; it is very suitable for applications in coastal areas, mines, sea dams and other projects. No need to do any anti-corrosion treatment for use and storage, no pollution to the concrete surface。
6. More than 50 times of turnover, long service life。
7. Waste products can be recycled and reprocessed, making full use of waste raw materials. Compared with wood formwork and bamboo glue board, the cost of loss is low, which can greatly reduce the construction cost.。
8. Environmental protection, energy saving, no pollution; no toxic and harmful gas emissions。
9. Easy to demould; no need to brush release agent, tapping the template to fall off, shorten working hours, save manpower and speed up the project。
10. Easy to process; can be ordered, can be sawed, can be drilled, vertical and horizontal can be connected and combined。
11. Easy to disassemble; easy to install and disassemble, fast and safe, convenient to support and operate, conducive to organization and construction, can effectively improve the construction progress.
.
Compare Plastic Shuttering for Concrete with other formwork.
Contrast items | Yaohang new hollow plastic building template |
PVC plastic building formwork | Wooden building formwork | Aluminum building formwork |
Reusable Time | 60-100 times | 20-30 times | 4 to 6 times | Around 50 times |
Drop test(10m) | unbroken | unbroken | rupture | broken |
Corrosion Resistance | Good | No | No | No |
Abrasion resistance | wear-resistant | wear-resistant | No | No |
After absorbing water | No deformed | No deformed | deformed | deformed |
Demoulding difficulty degree | Easy demoulding | Easy demoulding | hard demoulding | hard demoulding |
How hard it is to nail | Easy to drive nails | hard to drive nails | easy to drive nails | hard to drive nails |
expansion-contractility | Very small | It varies widely according to temperature scale |
small | small |
Energy conservation and emission reduction |
Can be recycled | Can be recycled | It uses a lot of wood | Can be recycled |
Weight (KG/m²) | 8.4 | 13 | 7.2 | < 25 |
Click here to make an inquiry.
Quality Inspection Method of Plastic Shuttering for Concrete
Flexibility test
Toughness test when the formwork is bent, use a forklift to crush the formwork that is not in the same plane ( one side is grounded, one side is placed obliquely) and the formwork is intact without damage after rebounding.
Shrinkage test
put the two formwork side by side on the wooden board to record the gap distance between the two boards. After two days and two nights, the distance is not more than 3-5mm. Compare with the previously measured data.
Impact strength test
Use a small hammer with a round head to slam the smooth surface of the plastic building formwork and observe the surface depression. Good-quality building templates will have depressions, but there will be no cracks.
Nail-holding strength
Nail at a distance of 5 mm from the edge of the plate. If there is no crack, this indicates that the quality of the plate is good, after the nail is nailed, observing whether the bonding state of the nail and formwork is saturated and tight.
Customers’ Visit
FAQ
1. Is the sample free?
As a factory, we would like to provide a free sample to you, and the international courier fee is borne by your side. But we will deduct the courier fee from your first order to show our sincerity to work with you.
2. Are you a real factory?
Yes, we are a true factory, welcome you to visit and factory.
3. What’s your MOQ?
At the beginning of our cooperation, your small quantity is acceptable.
4. What’s your lead time?
Usually, it is 7-10 days after your deposit.
5. What’s your payment term?
Usually, we consider T/T, but we can talk about the payment terms.
6. Why should we choose you?
High quality, technical support, and competitive price.
Click the link below to see more videos about Plastic Shuttering for Concrete