Building Shuttering Plastic
Product | Building Shuttering Plastic |
Material | polypropylene |
Size | 915*1830mm/1220*2440mm |
Thickness | 12mm/15mm/18mm/20mm |
What’s reusable building shuttering plastic?
We produce building shuttering plastic using the material polypropylene and because the structure has a hollow core, so we called it PP hollow plastic formwork for concrete. It is the new generation of formwork after wood formwork, steel formwork, aluminum formwork, and plywood formwork. And It is an energy-saving and environmentally friendly product.
The advantages of our building shuttering plastic.
1. Compared with traditional wooden/ steel formwork, building shuttering plastic ( PP hollow construction board) can reduce the cost by 30% because of its features: high strength, good impact resistance, good abrasion resistance, ,reusable at least 50 times and high cost-effective price.
2. It is very suitable for seaside buildings, and water conservancy projects because of its advantages: good waterproof capacity and doesn’t deform, crack, and delaminate.
3. It is easy for workers to operate: can be drilled, nailed, sawed, cut, etc. So It is very flexible for workers to use and suitable for all buildings and engineering.
4. It can improve dismantling efficiency by 40% because it is convenient to remove. Only tapping, our plastic formwork drops down and there is no need to worry about the damage from dropping down. What’s more, shaped concrete structures reach the standard of fair-face and can be directly decorated with veneer, shortening the construction time by 30%.
5. It can be used for special curved surface concrete structures because of its good toughness. We can use a forklift to bend the formwork.
6. With lightweight because of low density and hollow structure in the middle, it is easy for workers to carry and operate and reduce the transportation cost.
7. We don’t need brushing oil to save cost and shorten construction time because of its flat and smooth surface and not sticking to the concrete.
Make an Inquiry about PP formwork in concrete
Compare it with other formwork.
Contrast items | Yaohang new hollow plastic building template |
PVC plastic building formwork | Wooden building formwork | Aluminum building formwork |
Reusable Time | 60-100 times | 20-30 times | 4 to 6 times | Around 50 times |
Drop test(10m) | unbroken | unbroken | rupture | broken |
Corrosion Resistance | Good | No | No | No |
Abrasion resistance | wear-resistant | wear-resistant | No | No |
After absorbing water | No deformed | No deformed | deformed | deformed |
Demoulding difficulty degree | Easy demoulding | Easy demoulding | it is hard to demould | it is hard to demould |
How hard it is to nail | Easy to drive nails | hard to drive nails | easy to drive nails | hard to drive nails |
expansion-contractility | Very small | It varies widely according to temperature scale |
small | small |
Energy conservation and emission reduction |
Can be recycled | Can be recycled | It uses a lot of wood | Can be recycled |
Weight (KG/m²) | 8.4 | 13 | 7.2 | < 25 |
Quality Inspection Method
Flexibility test
Toughness test: Use a forklift to press the formwork that is not in the same plane ( one side is grounded, and the other side is placed obliquely). Finally, the formwork is intact without damage after recovery.
Shrinkage test
Firstly put the two formwork side by side on the wooden board to record the gap distance between the two boards. Then after two days and two nights, the distance is not more than 3-5mm compared with the previously measured data.
Impact strength test
Firstly use a small hammer with a round head to slam the smooth surface of the plastic building formwork, then observe the surface depression. Finally, good-quality building templates will have depressions, but there will be no cracks.
Nail-holding strength
Nail at a distance of 5 mm from the edge of the plate. If there is no crack, this indicates that the quality of the plate is good, after the nail is nailed, observing whether the bonding state of the nail and formwork is saturated and tight.
Customers’ Visit
FAQ
1. Is the sample free?
As a factory, we would like to provide a free sample to you, and the international courier fee is borne by your side. But we will deduct the courier fee from your first order to show our sincerity in working with you.
2. Are you a real factory?
Yes, we are a true factory, and welcome you to visit our factory.
3. What’s your MOQ?
At the beginning of our cooperation, we accept the small order to encourage the new order.
4. What’s your lead time?
Usually, it takes about 7-14 days.
5. What’s your payment term?
Usually, we consider T/T, but we can talk about the payment terms.
6. Why should we choose you?
Henan Yaohang is a direct manufacturer in China, So we may give you a competitive price based on reliable quality. What’s more, we can support you with technical support when the construction workers set up the formwork and solve the problems for the customers. Besides, We are a reliable manufacturer, we want our products to be sold everyplace that needs plastic formwork in the future. So we consider quality as the whole life of our enterprise. So We often train our workers and tell them how important quality is. Besides, we care about the lives of our worker to make sure they try their best to get the job done well, So they are always energetic and careful with their job. Finally, we welcome you to visit our factory if you have any opportunities.
Henan Yaohang Alloy Formwork Co.,Ltd is a professional plastic formwork producer in China, so we would like to give a good price to you. If you want to inquire, please click the link below.